close
Choose Your Site
Global
Social Media
DIN434 Square Taper Washer for Use with Channel Sections
Name | Square Taper Washer for Use with Channel Sections |
Standard | DIN434 |
Size Range | M8-M60 |
Finish | Bright&Clean&ZP&HDG |
Marking | No Marking,we accept your marking if you require |
Material | Carbon steel,SS304,SS316,904L,1.4529,Duplex2205/2507,inconel,monel,hastelloy |
Grade | Grade100HV,140HV,200HV,A2/A4,Grade 70&Grade80 |
Certificates | EN10204-3.1B |
Non-standards | OEM is available, according to drawing or samples |
Samples | Samples available |
Package | Bulk in box and then in cartons, then on pallets,or according to customers' requirement. |
Payment | T/T,Western Union， if order more than USD50,000 L/C is accepted |
Our advantages
If you require marking on it,it is ok
If you require plastic cap screw to protect the thread,it is ok
If you hope no MOQ,it is ok
If you require 3.1B certs it is ok
If you hope small packing,it is ok
If you require special material,it is ok
If you require drawing supports,it is ok
Drawings of DIN434
DIN434 Square Taper Washer for Use with Channel Sections
Name | Square Taper Washer for Use with Channel Sections |
Standard | DIN434 |
Size Range | M8-M60 |
Finish | Bright&Clean&ZP&HDG |
Marking | No Marking,we accept your marking if you require |
Material | Carbon steel,SS304,SS316,904L,1.4529,Duplex2205/2507,inconel,monel,hastelloy |
Grade | Grade100HV,140HV,200HV,A2/A4,Grade 70&Grade80 |
Certificates | EN10204-3.1B |
Non-standards | OEM is available, according to drawing or samples |
Samples | Samples available |
Package | Bulk in box and then in cartons, then on pallets,or according to customers' requirement. |
Payment | T/T,Western Union， if order more than USD50,000 L/C is accepted |
Our advantages
If you require marking on it,it is ok
If you require plastic cap screw to protect the thread,it is ok
If you hope no MOQ,it is ok
If you require 3.1B certs it is ok
If you hope small packing,it is ok
If you require special material,it is ok
If you require drawing supports,it is ok
Drawings of DIN434
